Project desk: +1 732 919 3119 · [email protected]Global project coordination

Dialight Lighting Notes

What to Look for in an Area Light Supplier: A 6-Step Purchasing Checklist

2026-09-28 · Henrik Sorensen · Lighting

Who This Checklist Is For

If you're the person who gets handed a facilities request like "we need to re-light the warehouse" or "the parking lot lights keep failing" — and you're expected to figure out the purchasing side without being an electrician — this is for you.

I'm an office administrator at a 200-person company. I manage roughly $180K in annual purchasing across eight vendors, including facility maintenance and lighting. I'm not an engineer. But I've been through three LED lighting retrofits since 2021, and I've learned that evaluating an area light supplier comes down to six things you can actually check.

This isn't about finding the cheapest quote. It's about not getting burned.

Step 1: Write Down What You Actually Need Before You Talk to Anyone

The most common mistake I see — and I've made it myself — is calling suppliers before you know your own requirements. You end up comparing quotes for different things and thinking you're comparing prices.

Before you request a single quote, answer these:

If I remember correctly, our first retrofit in 2021 covered about 22,000 square feet. We initially asked for quotes on "warehouse lighting" — which is about as useful as asking for "a vehicle." Once we specified mounting height, foot-candle targets, and the fact that the space had unheated sections that dropped below freezing, the quotes became actually comparable.

Step 2: Understand Which Specs Actually Matter

Ceiling light specifications can look like alphabet soup. Here's what I've learned to focus on after going through this process three times:

The numbers that affect your electric bill

Lumens per watt (lm/W). This is efficacy. Higher is better. A fixture rated at 140 lm/W will use roughly 30% less energy than one rated at 100 lm/W for the same light output. Over 10,000+ operating hours, that difference is real money.

Total lumens. This is the actual light output. Don't confuse this with wattage — a 150W fixture and a 100W fixture can produce the same lumens if their efficacy differs.

The numbers that affect whether people complain

Color temperature (CCT). 4000K is neutral white, common in industrial settings. 5000K is cooler and brighter-feeling — good for warehouses, less pleasant in offices. Pick one and stay consistent across the entire facility.

Color rendering index (CRI). For industrial spaces, 70+ is usually acceptable. If workers are doing color-sensitive tasks or if it's a customer-facing area, 80+ matters.

Beam angle / distribution. This is the one people skip. A fixture with the wrong distribution pattern creates hot spots and dark corners — and no amount of lumens fixes bad optics.

The number that affects safety compliance

IP rating. For outdoor or wet locations, you need IP65 or higher. For dusty environments, the second digit matters. Don't let a supplier talk past this one — it's a code issue in most jurisdictions, not a preference.

Step 3: Verify Certifications — Don't Take Anyone's Word for It

I only started checking certifications carefully after a vendor delivered fixtures with a UL label that turned out to be on the wrong model number. Our inspector caught it during the electrical rough-in. We had to send everything back. The project slipped two weeks and I spent a solid 6 hours explaining the delay to my VP.

Now I verify, without exception:

People assume that a known brand means the certifications are automatically correct. Actually, it's the opposite — a trusted brand makes suppliers and buyers both less likely to double-check, and that's where oversights happen.

Step 4: Calculate Total Cost, Not Unit Price

This is where the value-over-price principle gets real. The quoted unit price is almost never the number that matters.

Here's what actually goes into the cost:

Let me put numbers to it. We compared two quotes for our 2023 warehouse project. Option A was $185 per fixture at 100 lm/W. Option B was $230 per fixture at 140 lm/W. Across 62 fixtures, Option B looked like $2,790 more upfront. But the energy difference at our utility rate came to roughly $1,100 annually. Over five years, Option B was cheaper by a significant margin — and I didn't have to think about lumen depreciation as aggressively.

We went with Option B. It was a Dialight LED high bay model, as it happens — the supplier was a licensed Dialight distributor and provided the LM-80 and LM-79 test data when I asked. That transparency is one of the things that pushed it over the line for me.

Wholesale pricing on recessed lighting and area lights follows the same logic. If you're buying 50+ units, you're in a different pricing tier than someone buying 10. But "wholesale" only saves money if the product actually meets spec. A cheap wholesale fixture that fails in two years isn't wholesale — it's a liability.

Step 5: Evaluate the Supplier, Not Just the Product

A good fixture from a bad supplier is a bad purchase. Here's what I check:

The most frustrating part of vendor evaluation: the same issues keep showing up across different suppliers — vague lead times, warranty fine print, inconsistent technical answers. You'd think the industry would have standardized some of this, but it hasn't.

Step 6: Check Product Range — Can They Cover the Whole Project?

If your project involves more than one type of fixture — and they almost always do — a supplier who carries the full range saves you time and usually money.

A typical facility needs some combination of high bay, area lights, recessed downlights, emergency lighting, exit signs, and sometimes linear fixtures. If you're sourcing from a single supplier, you get consolidated shipping, one warranty contact, and — usually — better pricing on the whole order.

This is one reason I look for manufacturers with a broad portfolio. Dialight carries across these categories, which is convenient for buyers who don't have time to manage four separate vendor relationships. But the same principle applies to any supplier you're considering. Ask: what percentage of my project can you cover from your catalog?

The supplier who can handle 80% of your list in one order is usually worth a slight premium over the one who can only cover half.

Common Mistakes to Avoid

Three things I've seen — and done — that cause the most grief:

  1. Comparing quotes with different specifications. If one quote is for 4000K and another for 5000K, or one has IP65 and the other IP54, you're not comparing the same thing. Line up the specs side by side before you look at price.
  2. Skipping the sample unit. For any order over $5,000, ask for one fixture to physically inspect. It costs a little more upfront. It costs a lot less than discovering the mounting bracket doesn't match your ceiling.
  3. Not asking about the warranty claims process. I don't care what the warranty says if I can't use it. Ask: How do I file a claim? Who pays return shipping? How long does a replacement take? If the answers are vague before purchase, imagine what they'll be after.

None of this is complicated. It just takes an extra hour of checking before you sign the P.O. That hour has saved me far more than it cost — every single time I've done it.

Pricing and product availability mentioned in this article are for illustrative purposes based on past project experience (2023-2024); verify current pricing and specifications directly with suppliers.