Project desk: +1 732 919 3119 · [email protected]Global project coordination

Dialight Lighting Notes

The Hidden Cost of Cheap LED Lighting (And Why Your Ceiling Light Catalog Won't Show It)

2026-09-14 · Clara Whitmore · Lighting

I picked the low bid. I'd do almost everything differently now.

Two years ago I ran a lighting RFP across three of our facilities—90 fixtures, give or take (88, actually; I'd have to pull the PO to be sure). Mostly high bay replacement in two warehouses, plus six area lights on the loading dock.

Standard three-bid process. Procurement policy, not my bright idea.

Low bid: $61,400. Middle bid: $74,900. High bid: $81,000.

The upside was $13,500 against the capital budget. The risk was… well, I told myself the specs matched. I kept asking whether $13,500 was worth the chance of a maintenance headache down the road, and I kept arriving at the same answer: it's a lighting fixture, not a production line. How wrong can it go?

I pushed for the low bid. Of course I did. That's the whole job, right?

Eighteen months later, that project had cost us $89,200. The savings didn't evaporate. They inverted.

Here's what kills me: I'm not new at this. I manage our facilities budget—roughly $340,000 a year across maintenance, utilities, and capital line items—and I've been doing it for six years. I've negotiated with 40+ vendors. I built a TCO spreadsheet after getting burned on hidden freight charges back in 2021 (note to self: update the freight tab; it's using old fuel surcharge rates). I know how this is supposed to work.

I still missed three things. None of them were in the ceiling light catalog.

What the spec sheet actually tells you—and what it doesn't

When you're comparing LED fixtures, you look at lumens, wattage, CRI, color temperature, IP rating. That's the standard vocabulary. Every catalog uses it. Every bidder fills it in.

What nobody puts on the front page:

Lumen maintenance. That's the number showing how much light the fixture still produces at 60,000 hours. Two fixtures can both say "15,000 lumens" and be 40% apart in year five. One of them is going to need re-lamping before the warranty expires. The other isn't.

Driver quality. The LEDs themselves are rarely the failure point. The driver is. A cheap driver fails in year two or three, and now you're paying for a lift rental plus labor to swap a $60 component in a fixture mounted 32 feet up. That math doesn't work at any fixture price.

Warranty terms written in plain English. "10-year warranty" means nothing until you read what voids it. Some manufacturers void coverage if ambient temperature exceeds a certain threshold—which, for a warehouse in Phoenix, is most of the year. Ask for the warranty document, not the warranty headline.

I'll be blunt: if a supplier can't or won't produce third-party test data—DLC listing, LM-79 and LM-80 reports, ISTMT data—that's not a documentation gap. That's a signal.

The rep matters more than the logo on the box

This is the part I got wrong for years, and it cost us more than any single spec decision.

We've used Dialight LED high bay fixtures and Dialight area light fixtures for years. I think they're good products. I'm not going to tell you they're the only good products—I'm not going to tell you any single brand is. The reality is that the brand on the fixture has mattered less to our total cost than the distributor or rep supporting it.

Here's why.

A good high bay distributor does three things a bad one won't:

They'll talk you out of the wrong fixture. I once had a rep look at our ceiling heights, racking layout, and aisle widths, then tell me the fixture I'd specified was wrong for the application. He was right. He could've just sold me what I asked for—same commission either way. Instead I spent $4,000 less and got better coverage.

They stock the parts you'll actually need. Emergency battery packs, drivers, lens assemblies. The specific SKUs nobody thinks about until something fails at 2 AM on a Saturday.

They answer the phone in year three. This is the whole ballgame. Every supplier is responsive during the sale. The question is whether they're still responsive when a driver fails on a hard-to-reach fixture and you need a same-week replacement.

I've had both kinds. The difference in downtime is measured in days. Downtime in a distribution center is measured in dollars per minute.

When you're evaluating a high bay distributor—or any lighting supplier, really—ask one question that cuts through everything: "Can you give me three customers who bought from you two years ago, and who filed a warranty claim?"

How they answer that tells you more than the entire catalog.

The category nobody budgets for: emergency lighting

Emergency lighting and exit signs are the cheapest line item in a lighting project, and the most expensive thing to get wrong.

I'm not being dramatic.

Emergency fixtures fall under UL 924 and, in commercial and industrial facilities, NFPA 101 Life Safety Code. If your emergency lighting doesn't meet code, you're not looking at an inconvenience. You're looking at failed inspections, compliance findings, and in some jurisdictions, fines.

Here's what to look for in an emergency light supplier—the checklist I wish I'd had five years ago:

  1. Self-testing and self-diagnostics. Manual monthly testing is a compliance risk with a person's name attached to it. If the fixture can't test itself and report status, someone has to climb a ladder every month and sign a log. That person will eventually stop doing it. Then you find out during an inspection.
  2. Battery chemistry and field-replaceable design. NiCad and lithium have different service lives and different disposal requirements. Ask which one. Ask the rated life. Ask whether the battery is field-replaceable, or whether you're replacing the whole fixture in year five.
  3. Actual listed compliance documentation. Not a marketing claim. The UL 924 listing, on paper, with a model number matching what's shipping to you.
  4. Lead times on replacement units. Emergency fixtures fail at the worst possible time. If your supplier quotes six-week lead times on replacements, you're one failure away from being out of compliance.
  5. Someone who knows your local code requirements. NFPA 101 has local amendments in a lot of jurisdictions. A supplier who never asks where your facility is located isn't going to catch that.

That last one is the difference between a vendor and a partner. It's also why we now put emergency lighting through the same approval process as our capital equipment.

What the cheap decision actually cost us

Let me put real numbers on this, because "quality matters" is a slogan and spreadsheets aren't.

The low-bid project, eighteen months in:

That's $13,800, and it doesn't count the twelve hours I spent on the phone with a distributor who had already collected their money.

$61,400 + $13,800 = $75,200. The middle bid was $74,900.

I spent eighteen months of aggravation to save minus $300.

And here's the thing I keep coming back to, which isn't about money at all. When clients walk through our facility, they're reading the room. Lighting is part of that read. A warehouse that's dimly lit, with fixtures that flicker or have visible dark spots, communicates something about how a company operates—fair or not. I don't love that dynamic, but I've watched it play out. Three separate client visits in 2024 landed during a period when two of our high bay runs were visibly underperforming. Nobody said anything. You never get the honest version in the moment.

The short version

I'm not going to pretend there's a clever trick here. What changed our numbers was boring: we stopped buying lighting through the same three-bid process we use for office supplies.

What actually works, based on what we changed in 2023:

This was accurate as of early 2025. Fixture pricing, DLC qualification lists, and local code amendments move fast—verify current numbers before you build a budget on any of this.

And if you take nothing else from a stranger's $13,800 mistake: the number on the bid form is the beginning of the cost, not the end of it.