-
Why I Keep This Checklist
-
The 7-Step Checklist
-
Step 1: Match the fixture to the actual space
-
Step 2: Do the total cost math before you compare prices
-
Step 3: Verify certifications from the source, not the sales sheet
-
Step 4: Confirm track lighting compliance requirements before ordering
-
Step 5: Vet the distributor as hard as you vet the product
-
Step 6: For private label ceiling lights, ask who actually manufactures them
-
Step 7: Document everything at delivery
-
Step 1: Match the fixture to the actual space
-
Common Mistakes I Still See (and Made Myself)
-
Bottom Line
Why I Keep This Checklist
I'm a purchasing lead, and I've been handling commercial lighting orders for six years. I've personally made—and documented—14 significant mistakes, totaling roughly $23,000 in wasted budget. Not a number I'm proud of, but it's the reason I now maintain a checklist that has caught 47 potential errors in the past 18 months.
If you buy LED high bays, exit signs, track lighting, or private label ceiling lights for a living, this one's for you. The common thread in almost every expensive mistake I've made was trusting something I should have verified: a spec sheet, a sales rep, a “well, last time we ordered this” assumption. This checklist fixes that. Seven steps, in the order I actually use them.
The 7-Step Checklist
Step 1: Match the fixture to the actual space
My first serious mistake was ordering 15 LED high bays based on the previous building's specs. New building had 30-foot ceilings; the old one had 24. The photometrics were completely off—dark spots in the aisles, wasted light in the wrong zones, and an electrician explaining what should have been obvious: you buy for the space you have, not the space you had.
That order cost $8,900 in fixtures plus $2,400 to re-rent the lift and redo the install. What I mean by “match the fixture to the space” is this: mounting height, ceiling type, aisle width, ambient temperature, and light distribution all change what you actually need. The fixture count and wattage on a previous PO are a starting point, not a specification. If you're evaluating a Dialight LED high bay or any other brand, run the photometric layout for the actual room. Most manufacturers will do it for free if your distributor asks.
Step 2: Do the total cost math before you compare prices
Look, I used to compare unit prices and take the lowest quote. That's how I ended up with 25 “bargain” high bays with a driver failure rate around 30% in the first 18 months. Maintenance calls, replacement fixtures, labor—nobody quotes that. It took me 4 years and about 85 orders to internalize this: the sticker price is just the beginning.
Now I calculate total cost on every fixture: unit price + shipping + installation + expected replacement rate + energy use over projected life + the cost of downtime when one fails. Time cost matters too—hours spent chasing warranty claims are hours nobody budgets for. In 2023, we ran this math for a warehouse retrofit, trialing the Dialight Vigilant LED high bay against two other options. Dialight wasn't the cheapest unit price. But the warranty terms, published life, and the fact that support actually answers the phone made the TCO clearly better. The quote that was $2,800 cheaper upfront? We spent nearly $6,000 fixing a third of those units within 14 months. So now TCO comes first, price comes last.
Step 3: Verify certifications from the source, not the sales sheet
This one still stings. I bought 40 exit signs for a tenant space after the sales rep said “UL listed, don't worry.” Turns out the LED driver was UL listed—the complete fixture assembly wasn't. The inspector caught it during final walkthrough, and we swapped all 40 signs. $890 in product replacement, a 1-week schedule delay, and a credibility hit with our client.
Certifications aren't decoration. For commercial lighting, I verify UL 1598 for luminaires and UL 924 for emergency lighting and exit signs. I also check the DLC Qualified Products List (designlights.org) if utility rebates are part of the deal—a sales page can claim “rebate eligible” all day, but the DLC database is the source of truth. Check the listing on the fixture label itself, not just the data sheet. If they can't give you a file number, that's an answer in itself.
Step 4: Confirm track lighting compliance requirements before ordering
Track lighting is where I learned the difference between “the product is fine” and “the product is fine here.” I'm not a code expert, so I can't give you a jurisdiction-by-jurisdiction guide. What I can tell you from six years of purchasing is that track lighting compliance requirements vary by state and by local adoption of the NEC, and you need to check before you order, not after the fixtures arrive.
In 2022, we specified track lighting for a retail space. The fixtures were fine. The installation wasn't—the track sections needed additional support under the local inspector's interpretation, and he flagged it. $450 in parts and a 3-day production delay. The fix was simple; the embarrassment wasn't. My rule now: before any track lighting PO, verify the applicable code edition with the AHJ, and ask specifically about support and bonding requirements. Also check the energy code—California's Title 24 and the latest IECC versions have specific track lighting requirements that can affect both fixture and controls.
Step 5: Vet the distributor as hard as you vet the product
Here's something I didn't appreciate until it bit me: the distributor determines what your “support” actually looks like. In 2021, I ordered exit signs through a distributor that didn't stock them. Competitive price, normal delivery promise, and then six weeks of waiting with no updates and zero technical help when we found a batch defect. (Not that we ever got a straight answer about that, either.)
Now distributor selection is its own step. Does the distributor actually stock the SKU, or are they drop-shipping from another warehouse? Is there a lighting specialist on staff, or just a phone queue? Do their quotes include code-compliance guidance? A good exit sign distributor knows what inspectors look for and will flag potential problems before you're on site. If you're buying through a Dialight distributor, the product support is usually strong—but I ask these questions every time, because a competent distributor beats a slightly better price.
Step 6: For private label ceiling lights, ask who actually manufactures them
Private label can be a great deal—I'll say that upfront. It only works if you know what's under the label. I once ordered 60 private label LED ceiling panels under a building-supply brand. Six months of trouble-free performance, then the drivers started failing. The seller's response was “contact the manufacturer.” Except the manufacturer was unnamed under the private label and effectively unreachable. The warranty was a piece of paper that turned out to be a forwarding address that didn't forward. (I really should have asked this before I wrote that PO.)
The question is simple: who actually makes this fixture, and will they honor the warranty if the brand disappears? If the seller can't answer, you're not buying a product—you're buying a sticker. I'm not a warranty lawyer, so I'll leave the legal analysis alone. From a purchasing perspective: for any ceiling light private label order, get the original factory name, get warranty terms in writing, and request a sample before committing to volume.
Step 7: Document everything at delivery
This is the step everyone skips, and it's the one that saves the most money. When our 36-piece Dialight Vigilant LED high bay order arrived in 2023, I had the team photograph every fixture label, log serial numbers, and email a confirmation to the distributor. When one driver failed six months later, the warranty claim took a week and zero arguments. Compare that to an earlier order with no serial numbers, no photos, no records—that claim dragged for three weeks, and I ate most of the labor cost. Documentation at the loading dock feels like admin work. It's actually your only leverage when something goes wrong.
Deliveries get damaged, parts go missing, manufacturers ship revisions. Photos and serial numbers at the receiving stage turn a he-said-she-said into “here's what arrived, dated and documented.” Certifications, documentation, delivery condition—if you're going to be obsessive about three things, those are the three.
Common Mistakes I Still See (and Made Myself)
The biggest one is signing a PO under time pressure. Every major mistake I've made was preceded by “we need this fast.” The checklist adds maybe 30 minutes on the front end and saves days on the back end.
Second: not putting warranty terms in writing. If the response to your request is “don't worry, we stand behind our products,” send a follow-up email asking for the actual terms. If it doesn't come back in writing, assume you don't have them.
Third: forgetting that rebates and codes are time-sensitive. Utility rebate programs change. Code editions change. I check DLC status and code requirements at the time of order, not from memory. As of January 2025, the official databases are current on their websites—check them rather than last year's notes.
Bottom Line
It took me a while—and a painful amount of wasted budget—to land on this process. But the past 18 months have been the cleanest run of lighting orders I've had: 47 potential errors caught before they became real ones, and zero surprises at inspection. The goal isn't perfection. The goal is to catch the avoidable problems before they cost you.
So: verify the space, run the TCO, check the certs, confirm the compliance requirements, vet the distributor, know who makes the private label, and document everything at delivery. Seven steps. Put them on a checklist—like I did. You'll thank yourself the first time a delivery would have gone sideways.
Disclaimer: Certification and code information is general guidance as of January 2025. Verify current requirements with official sources like UL, the DLC QPL, and your local AHJ. Prices and experiences reflect my own order history and will vary for your projects.