-
Step 1: Measure Actual Mounting Heights, Not What the Plans Say
-
Step 2: Define Light Levels by Task Zone, Not by the Whole Building
-
Step 3: Ask for Photometric Files, Not Just Spec Sheets
-
Step 4: Check Certifications Against Your Actual Situation
-
Step 5: Read the Warranty Exclusions—Especially the Driver
-
Step 6: Verify Voltage and Control Compatibility
-
Step 7: Compare Total Cost of Ownership, Not Unit Price
-
Common Mistakes to Avoid
-
Final Recap
Let me be clear about who you're getting this from: I'm not a lighting engineer or a specifier. I'm an office administrator at a distribution company with about 45 employees, and part of my job is keeping the facility running. I manage purchasing across roughly 20 vendors—around $150,000 annually, most of it operational. Lighting became my line item in 2020 when our facilities manager retired, and I've signed off on enough LED high bay orders since then to know what matters and what's just catalog marketing.
This checklist is for anyone sourcing warehouse lighting for wholesale—whether you're a distributor stocking fixtures, an OEM bundling lighting into larger projects, or a buyer managing your own facility. It's seven steps, in a specific order, and none of them require a lighting degree.
One note before we start: this was accurate as of early 2025. Product specs and pricing in this market change fast, so verify the current data before you commit money to a purchase order.
Step 1: Measure Actual Mounting Heights, Not What the Plans Say
Walk every bay with a laser distance measurer—they're cheap—and write down the real mounting height. I've found differences of up to two feet between construction drawings and what we actually had in the building. That matters because a Dialight LED high bay has a designed beam angle for a specific distance. The same fixture mounted at 20 feet performs completely differently than at 40 feet. Get this wrong, and you'll either have dark spots on the floor or spend money lighting empty air.
Write down three things:
- mounting height at every bay
- bay spacing, center to center
- ceiling type—flat, sloped, or with skylights
You'll need all three in Step 3, when you ask for photometric layouts.
Step 2: Define Light Levels by Task Zone, Not by the Whole Building
The most common mistake I see: someone asks "how bright should the warehouse be?" and the answer is treated as one number. It isn't. A warehouse is several different workspaces under one roof.
Roughly speaking, here's where we landed on our own projects:
- Storage aisles — 10 to 20 foot-candles, but with decent vertical light so workers can read pallet labels
- Picking zones — 30 to 50 foot-candles, consistent, because picking mistakes cost more than electricity
- Loading docks — brighter, and on occupancy sensors, so you're not lighting an empty space all night
I'm not 100% sure these numbers match the latest IES recommendations, and those have been updated in recent years. Look up current IES guidelines for your specific applications before you spec. But start with the tasks, then work to light levels—not the other way around.
Also, get the warehouse operations manager into the conversation early. They're your internal customer; they'll live under these lights every day. A lighting plan that ignores their feedback will fail even if the math is perfect.
Step 3: Ask for Photometric Files, Not Just Spec Sheets
This is the step most purchasing people skip, and it's the one most likely to change your decision.
A spec sheet tells you wattage and lumens. A photometric file—usually in .ies format—tells you how the light actually distributes from the fixture. Two fixtures with identical lumen output can perform very differently in a warehouse, depending on beam angle, reflector design, and shielding.
What most people don't realize is that a lighting rep can run a basic photometric layout against your specific mounting height and bay spacing in just a few minutes. That layout shows you where light will land and, critically, how many fixtures you actually need. I've compared two quotes for the same warehouse where the cheaper fixture needed 40% more units to hit the same light level. Its price advantage disappeared immediately.
So here's the test: if a supplier can't or won't provide photometric data, that tells you something. It doesn't necessarily mean the fixture is bad—but it means you'd be buying on trust alone.
Step 4: Check Certifications Against Your Actual Situation
Certifications aren't stickers. They're condition checks for insurance, code compliance, and utility rebates.
- UL Listing — required for most commercial installations and demanded by many insurance carriers.
- DLC Listing — often required to qualify for utility rebates. Check your local program before purchase, not after.
- IP rating — indicates how well the fixture is sealed against dust and moisture. Warehouses generally need IP65 or better, especially in unsealed spaces.
One more check, and this is something I care about as a buyer: per FTC guidelines at ftc.gov, advertising claims need to be truthful and substantiated. Their Green Guides address environmental claims specifically, so broad terms like "eco-friendly" or "high-efficiency" should come with evidence. When a supplier says "you'll save 30% on energy," ask to see the report behind that number.
Step 5: Read the Warranty Exclusions—Especially the Driver
Here's something vendors won't usually bring up: the warranty length and the warranty coverage are two different things.
I once reviewed a quote with an impressive 10-year warranty. Buried in the document, though, was a clause limiting coverage on the LED driver to half that period. The driver is the component most likely to fail. The warranty was worth much less than it looked.
Ask these three questions directly, and get the answers in writing:
- Does the warranty include the driver?
- Who pays shipping on a failed fixture—us or them?
- Who covers labor to replace a fixture under warranty?
I've seen a $200 savings on cheap fixtures turn into a $1,500 problem when drivers failed and labor wasn't covered. If a vendor hesitates on these questions, that's worth noting.
Step 6: Verify Voltage and Control Compatibility
This is the boring step that causes the biggest budget surprises later.
Most warehouses run lighting at 277V or 480V—not the 120V you'd find in an office. Order the wrong voltage, and you're not just swapping a plug; you need transformers or an entirely different fixture. Either way, it's expensive rework.
Same principle applies to controls. If you're planning occupancy sensors or daylight harvesting—which most warehouses should be—confirm the fixture is compatible before you order. Retrofitting controls after installation means disassembling brand-new fixtures, which is exactly as painful as it sounds.
I'll put a spotlight on one detail I learned the hard way: ask whether the driver accepts multiple voltage inputs. Multi-voltage drivers simplify ordering, reduce inventory complexity, and make a big difference when you're buying wholesale across multiple sites. If the fixture you're considering doesn't have that option, factor the extra logistics into your comparison.
Step 7: Compare Total Cost of Ownership, Not Unit Price
I have mixed feelings about writing this, because it sounds like every salesperson's closing line. But I've run this calculation enough times to know the pattern: the lowest-priced fixture is rarely the lowest-cost fixture.
Let me give you a simplified example. These numbers are illustrative, so don't hold me to them, but the structure of the calculation is what matters.
Fixture A: $120 each, 20,000 lumens, 70,000-hour rated life, good optics.
Fixture B: $85 each, 20,000 lumens, 50,000-hour rated life, weaker optics.
To cover 70,000 hours, you need 1.4 of Fixture B for every Fixture A. Fixture B also consumes more energy to deliver the same usable light on the floor. Plus labor for one replacement cycle. That $35 difference per unit becomes a $400 difference over ten years. Per fixture. Multiply that by 150 fixtures and you're talking real money.
Now, I'm not saying the most expensive option is always the right one. I'm saying you need to run the calculation before you let unit price make the decision for you.
Common Mistakes to Avoid
These are mistakes I've either made or watched colleagues make on wholesale lighting purchases:
- Don't decide based on a sample alone. A sample tells you color quality and build. It doesn't tell you light distribution in your space. Ask for existing installations you can visit or at least call.
- Don't forget freight. High bay fixtures are heavy and bulky. Freight can add 5–10% to your total. A quote that excludes freight isn't a real price—ask for the landed cost, door to door.
- Don't assume one manufacturer's strength carries across product categories. If your project includes canopies for fuel stations or covered docks, look for a canopy light manufacturer with actual depth in that category. We once consolidated canopy and high bay orders with one supplier to cut vendor count, but only after checking that their canopy offering was genuinely established, not a side project.
- Do verify your distributor is authorized. Before I placed a recent Dialight high bay order, I confirmed our distributor was listed on the manufacturer's official website. It took two minutes and saved potential warranty headaches later.
- Don't rush for "end-of-month" pricing deadlines. In my experience, these roll over. Take this with a grain of salt, but I've never seen a lighting quote deadline that didn't simply extend.
Final Recap
Seven steps, none of them hard:
- Measure actual mounting heights.
- Define light levels by task zone.
- Ask for photometric files.
- Check certifications and substantiated claims.
- Read warranty exclusions.
- Verify voltage and controls compatibility.
- Compare total cost over ten years, not unit price.
This was accurate as of early 2025; specs, pricing, and standards evolve. Verify before you commit. Follow the checklist, and you won't be the person explaining later why the cheap fixtures weren't cheap at all. That's a conversation worth avoiding.